Confused how conversion LAN cable to the USB cable?
here there is a little tutorial newbie's own conversion,
Let \ 's begin !!
how to cut a second aja both of UTP cable and USB, When it was in the new pieces in the connect cables - colored wires as follows:
[UTP] white orange - orange (2 wires) => [USB] red
[UTP] green and white (1 cable) => [USB] white
[UTP] green (1 cable) => [USB] green
[UTP] white, blue, blue, white, brown, brown (4 wires) => [USB] black
Usually when USB extender makes use of UTP cable to use symbolic griddle,
Ko kn?
if already so the cord, do not forget to set your own USB 2.0 USB 1.1.
You know knp should set it to 1.1?
1.1 instead of the slow data transfer?
Bener bgt, gini brief explanation, if he takes power USB 2.0 for greater data transfer, but the mileage it shorter
Quote USB 1.1 ga tralu cepet, in pc kedetectnya 10Mbps klo ga, ga jg using that power which tralu large, so it can cover the distance is relatively long cables.
bgetoo ceritanyaaa
How to Change the USB 2.0 into a USB 1.1
actually there are two ways,
1. through bios
2. through device manager
we bahasnya which means no 2 aja yah let practical.
signed a windows key + pause break, ato right-click on My Computer and select Properties.
select the hardware tab, select the device manager, find the Universal Serial Bus controllers and choose.
then search for the word Enchanced, right click and select Disable.
Done!
Current USB 1.1 km already finished:
Make Power Amplifier Extender
just look for the phone charger using that ato umm, use adapters that can be set so the voltage of 5 V.
Find the positive pole (+) and negative (-) use multitester.
Then sambungin deh negative pole to the black cable (USB), positive pole to the red wire (USB),
wrong
